2016 Tesla Model X
reported issues, recalls & what to inspect
This report uses official federal safety records plus VeroRoad’s vehicle × tool evidence. It is a screening tool, not a reliability grade or prediction that your specific car will fail.
NHTSA complaints are consumer-submitted allegations, not verified failures. Raw complaint totals are not failure rates because vehicle sales/exposure are not normalized here. A recall is an official safety campaign, but your VIN may or may not be included.
Which systems appear most often in the complaint record?
Use this to prioritize inspection effort, not to label the vehicle “good” or “bad.”
That does not prove the vehicle has no problems. Use the exact VIN, service history and an independent inspection.
Where were mileage-at-failure values reported?
NHTSA did not return enough usable mileage values for a timeline.
Official campaigns returned for this model-year query
Open the exact VIN before purchase to determine whether a campaign applies and whether the remedy was completed.
17V639000SEATS:MID/REAR ASSEMBLY
Tesla, Inc. (Tesla) is recalling certain 2016-2017 Model X vehicles. The left-side, second row, reclining seat backs may not fully latch due to having incorrectly adjusted recliner mechanism cables. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 207, "Seating Systems," and 210, "Seat Belt Assembly Anchorages."
Why it matters: If the seat back moves forward in the event of a crash, it can increase the risk of injury.
Remedy: Tesla will notify owners, and Tesla service technicians will correct the cable adjustment for the left-side, fold-flat, second row, seat recliner mechanism, free of charge. The recall began on November 10, 2017. Owners may contact Tesla customer service at 1-877-798-3752. Tesla's number for this recall is SB-17-13-004.
Reported 12/10/2017 · Verify exact VIN applicability.17V260000PARKING BRAKE
Tesla, Inc. (Tesla) is recalling certain 2016 Model S and Model X vehicles. The electric parking brake calipers have an internal gear that may be improperly manufactured, possibly resulting in the gear fracturing during parking brake application or release.
Why it matters: If the gear breaks during parking brake release, the vehicle will not be able to be moved. If the gear breaks during parking brake application, the parking brake may not adequately hold the vehicle, potentially resulting in the vehicle rolling, increasing the risk of a crash.
Remedy: Tesla will notify owners, and service centers will replace both the left and right electric parking brake calipers, free of charge. The recall began March 6, 2018. Owners may contact Tesla customer service at 1-877-798-3752. Tesla's number for this recall is SB-17-33-002.
Reported 19/04/2017 · Verify exact VIN applicability.16V192000SEATS:MID/REAR ASSEMBLY
Tesla Motors, Inc. (Tesla) is recalling certain model year 2016 Model X vehicles manufactured September 29, 2015, to March 30, 2016. In the affected vehicles, the third row seat back may move forward under load such as in a frontal collision. As such, the vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) number 207, "Seating Systems."
Why it matters: If the third row seat does not remain in its adjusted position, there may be an increased risk of injury to an occupant in the event of a crash.
Remedy: Tesla will notify owners, and dealers will replace all affected third row seats, free of charge. The recall began on April 20, 2016. Owners may contact Tesla customer service at 1-844-248-3752 or by email at ServiceHelpNA@teslamotors.com. Tesla's number for this recall is SB-16-13-003
Reported 06/04/2016 · Verify exact VIN applicability.22V037000ELECTRICAL SYSTEM:ADAS:AUTONOMOUS/SELF DRIVING:SOFTWARE
Tesla, Inc. (Tesla) is recalling certain 2016-2022 Model S and Model X, 2017-2022 Model 3, and 2020-2022 Model Y vehicles. The "rolling stop" functionality available as part of the Full Self-Driving (Beta) software may allow the vehicle to travel through an all-way stop intersection without first coming to a stop.
Why it matters: Failing to stop at a stop sign can increase the risk of a crash.
Remedy: Tesla will perform an over-the-air (OTA) software update that disables the "rolling stop" functionality, free of charge. Owner notification letters were mailed March 28, 2022. Owners may contact Tesla customer service at 1-877-798-3752. Tesla's number for this recall is SB-22-00-001.
Reported 27/01/2022 · OTA remedy noted · Verify exact VIN applicability.21V035000BACK OVER PREVENTION:SOFTWARE
Tesla, Inc. (Tesla) is recalling certain 2012-2018 Tesla Model S and 2016-2018 Model X vehicles with a center display equipped with a NVIDIA Tegra 3 processor and an 8GB eMMC NAND flash memory device. When the 8GB eMMC NAND flash memory device for the center display reaches lifetime wear, the eMMC controller will no longer be able to maintain the integrity of the filesystem, causing a failure in some of the center display functions.
Why it matters: The eMMC controller wear-out condition can cause the loss of the rearview camera display, defrost/defog control settings, and exterior turn signal lighting, reducing visibility and increasing the risk of a crash.
Remedy: Owners should ensure their vehicles are operating firmware release 2020.48.48.12 or newer, which will alert owners if the eMMC is approaching lifetime wear. Tesla will notify owners, and will replace the VCM daughterboard with one containing an enhanced eMMC controller, free of charge. The recall began March 29, 2021. Owners may contact Tesla customer service at 1-877-798-3752. Tesla's number for this recall is SB-21-21-001.
Reported 29/01/2021 · Verify exact VIN applicability.20V062000STEERING:ELECTRIC POWER ASSIST SYSTEM
Tesla, Inc. (Tesla) is recalling certain 2015-2016 Model X vehicles. The aluminum bolts that attach the power steering gear assist motor to the gear housing may corrode and fracture causing a reduction or complete loss of power steering assist.
Why it matters: Loss of power steering assist would require a higher steering effort, especially at lower speeds, which may increase the risk of a crash.
Remedy: Tesla will notify owners, and Tesla Service Centers will replace the steering gear mounting bolts with coated steel bolts, and add a corrosion-preventative sealer to the steering gear motor housing and motor connection bolts. If the mounting bolts are found to be broken or break during removal and cannot be removed, a new steering gear will also be installed. All services will be performed free of charge. The recall began February 15, 2021. Owners may contact Tesla customer service at 1-877-798-3752.
Reported 05/02/2020 · Verify exact VIN applicability.20V710000STRUCTURE:BODY
Tesla, Inc. (Tesla) is recalling certain 2016 Model X vehicles. The front and spine cosmetic roof trim may have been adhered to the vehicle without first using primer. As a result, one or both pieces of trim may separate from the vehicle while moving.
Why it matters: Trim that separates from the vehicle during use can cause a road hazard and increase the risk of a crash.
Remedy: Tesla will notify owners, and dealers will test the roof trim adhesion, and, as necessary, apply primer, free of charge. The recall began January 15, 2021. Owners may contact Tesla customer service at 1-877-798-3752. Tesla's number for this recall is SB-20-12-005. This recall has been superseded by Recall 24V615 (SB-24-12-008).
Reported 17/11/2020 · Verify exact VIN applicability.23V085000STEERING:AUTOMATED/ADAPTIVE STEERING
Tesla, Inc. (Tesla) is recalling certain 2016-2023 Model S, Model X, 2017-2023 Model 3, and 2020-2023 Model Y vehicles equipped with Full Self-Driving Beta (FSD Beta) software or pending installation. The FSD Beta system may allow the vehicle to act unsafe around intersections, such as traveling straight through an intersection while in a turn-only lane, entering a stop sign-controlled intersection without coming to a complete stop, or proceeding into an intersection during a steady yellow traffic signal without due caution. In addition, the system may respond insufficiently to changes in posted speed limits or not adequately account for the driver's adjustment of the vehicle's speed to exceed posted speed limits.
Why it matters: FSD Beta software that allows a vehicle to exceed speed limits or travel through intersections in an unlawful or unpredictable manner increases the risk of a crash.
Remedy: Tesla will release an over-the-air (OTA) software update, free of charge. Owner notification letters were mailed April 15, 2023. Owners may contact Tesla customer service at 1-877-798-3752. Tesla's number for this recall is SB-23-00-001.
Reported 15/02/2023 · OTA remedy noted · Verify exact VIN applicability.23V838000ELECTRICAL SYSTEM:ADAS:AUTONOMOUS/SELF DRIVING:SOFTWARE
Tesla, Inc. (Tesla) is recalling 2012-2023 Model S, 2016-2023 Model X, 2017-2023 Model 3, and 2020-2023 Model Y vehicles equipped with all versions of Autosteer leading up to the version(s) that contains the recall remedy. In certain circumstances when Autosteer is engaged, the prominence and scope of the feature's controls may not be sufficient to prevent driver misuse of the SAE Level 2 advanced driver-assistance feature.
Why it matters: In certain circumstances when Autosteer is engaged, and the driver does not maintain responsibility for vehicle operation and is unprepared to intervene as necessary or fails to recognize when Autosteer is canceled or not engaged, there may be an increased risk of a crash.
Remedy: Tesla will release an over-the-air (OTA) software update, free of charge. Owner notification letters were mailed February 10, 2024. Owners may contact Tesla customer service at 1-877-798-3752. Tesla's number for this recall is SB-23-00-008.
Reported 12/12/2023 · OTA remedy noted · Verify exact VIN applicability.24V051000ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
Tesla, Inc. (Tesla) is recalling certain 2012-2023 Model S, 2016-2024 Model X, 2017-2023 Model 3, 2019-2024 Model Y, and 2024 Cybertruck vehicles. An incorrect font size is displayed on the instrument panel for the Brake, Park, and Antilock Brake System (ABS) warning lights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 105, "Hydraulic and Electric Brake Systems" and 135, "Light Vehicle Brake Systems."
Why it matters: Warning lights with a smaller font size can make critical safety information on the instrument panel difficult to read, increasing the risk of a crash.
Remedy: Tesla began releasing an over-the-air (OTA) software update, free of charge. Owners may contact Tesla customer service at 1-877-798-3752. Tesla's number for this recall is SB-24-00-003.
Reported 30/01/2024 · OTA remedy noted · Verify exact VIN applicability.What I would inspect before money changes hands
The highest reported component groups are converted into inspection tasks. They are not diagnoses.
Baseline vehicle inspection
- Cold start, road test and full-system scan
- Check fluids, leaks, tires, brakes and battery
- Review maintenance, collision and recall history
Make it harder for a recently cleared warning light to fool you.
A clean dashboard is not the same as a clean scan. Readiness monitors, pending codes and permanent codes provide useful context during a pre-purchase inspection.
- Run a full-system scan before clearing anything
- Read current, pending and permanent powertrain codes
- Check readiness monitors; multiple “Not Ready” monitors can be consistent with a recently cleared ECU or disconnected battery
- Save freeze-frame data for any stored emissions/powertrain fault
- Scan ABS, SRS, transmission and body modules when the tool supports them
- Check 12V battery / charging condition because low voltage can create misleading module faults
Look beyond recalls.
Manufacturers submit service bulletins, warranty extensions, repair instructions and other communications to NHTSA. These documents can reveal service procedures and known conditions that are not necessarily safety recalls.
Tools that intersect this inspection path
These recommendations use VeroRoad’s existing exact vehicle/function evidence. Fit comes before price.
Autel MaxiCOM MK900-BT
Intersects 4 functions used in this inspection path.
XTOOL D8 (2026)
Intersects 4 functions used in this inspection path.
Autel MaxiCOM MK900-TS
Intersects 4 functions used in this inspection path.
TOPDON ArtiDiag900 Lite
Intersects 4 functions used in this inspection path.
Useful supporting equipment
A scanner cannot replace physical inspection and measurement. These tools cover common gaps.
Professional battery and resistance testing with sequence testing for higher-volume work.
Check price on Amazon →Useful for locating abnormal heat in electrical, mechanical and EV-related troubleshooting without assuming it is mandatory for every job.
Check price on Amazon →Adds multimeter and current-clamp measurements for deeper electrical troubleshooting when paired with supported MaxiBAS tools.
Check price on Amazon →Dedicated TPMS workflow plus diagnostics and service functions; strong fit when TPMS is a frequent shop job.
Check price on Amazon →Tesla Model X Risk Radar by year
Where these signals come from
Federal data are fetched from NHTSA’s public APIs. VeroRoad aggregates the records into screening signals and keeps complaints separate from confirmed recalls.