Autel MaxiTPMS ITS600
on a 2023 BYD e2
This page answers a different question from a generic product review: what can you reasonably learn and attempt with this exact tool on this exact model year, based on the evidence VeroRoad currently stores?
Treat this as a learning route, not a verified all-function compatibility claim.
The strongest current intersection is TPMS sensor coverage at 48/100 evidence score. VeroRoad keeps broad product capability separate from exact model-year evidence so unsupported features are not silently promoted.
Your first diagnostic session on this car
- 1Confirm the selected vehicle identity: 2023 BYD e2. Use VIN/AutoVIN when the tool supports it, then verify the decoded vehicle before continuing.
- 2Run and save an initial health/full-system scan when available. Do not clear codes first.
- 3Choose the system related to the symptom and inspect the original DTC context, freeze-frame and live data.
- 4Only run active/service functions shown as supported for this model-year and module. Follow the current factory/vendor procedure for safety-critical work.
- 5After repair or service, re-scan and compare the vehicle state with the original report.
What VeroRoad can document for this tool + car
| Function | Evidence level | Score | Primary source layer |
|---|---|---|---|
| TPMS sensor coverage | Capability match — verify exact vehicle | 48/100 | Autel |
| TPMS sensor programming | Capability match — verify exact vehicle | 48/100 | Autel |
| TPMS reset / relearn | Capability match — verify exact vehicle | 48/100 | Autel |
| Read DTCs | Capability match — verify exact vehicle | 48/100 | Autel |
| Clear DTCs | Capability match — verify exact vehicle | 48/100 | Autel |
| Live data | Capability match — verify exact vehicle | 48/100 | Autel |
| Oil service reset | Capability match — verify exact vehicle | 48/100 | Autel |
| Electronic parking brake service | Capability match — verify exact vehicle | 48/100 | Autel |
| Battery registration / BMS | Capability match — verify exact vehicle | 48/100 | Autel |
| Steering angle sensor calibration | Capability match — verify exact vehicle | 48/100 | Autel |
Scores summarize stored evidence and source freshness. Engine, trim, VIN, module and region qualifiers only become exact when the source names them.
Autel MaxiTPMS ITS600 on the 2023 BYD e2
This is the professional layer: exact stored coverage rows, protocol-capability flags, evidence versions and a disciplined first-session plan. Product capability remains separate from exact module support.
No extra pro flag asserted from this product record.
No system names stored for this tool/year.
No source version stored.
Save the complete module/DTC baseline before any reset or coding.
Reduce the PID list to signals that can prove or disprove the fault; graph relationships rather than staring at a long text list.
Command one state at a time, watch scan feedback, and verify the physical output independently when the diagnosis requires it.
Do not assume pass-thru programming from a general diagnostic capability list; verify the exact VCI/programming path first.
Choose the job and keep this tool selected.
Choose the car. Keep MaxiTPMS ITS600 selected.
If you choose a job too, VeroRoad opens the exact vehicle × job × tool article. If you stop at the car, it opens a tool-on-this-car learning page.